卡擦安装如下包．

报了更多的错．

bos.mp 5.1.0.67                           # Fileset Update
    bos.mp 5.1.0.63                           # Fileset Update
    bos.mp 5.1.0.56                           # Fileset Update
    bos.mp 5.1.0.64                           # Fileset Update
    bos.mp 5.1.0.66                           # Fileset Update
    bos.mp 5.1.0.53                           # Fileset Update
    bos.mp 5.1.0.62                           # Fileset Update
    bos.mp 5.1.0.59                           # Fileset Update
    bos.mp64 5.1.0.68                         # Fileset Update
    bos.mp64 5.1.0.64                         # Fileset Update
    bos.mp64 5.1.0.57                         # Fileset Update
    bos.mp64 5.1.0.65                         # Fileset Update
    bos.mp64 5.1.0.67                         # Fileset Update
    bos.mp64 5.1.0.53                         # Fileset Update
    bos.mp64 5.1.0.63                         # Fileset Update
    bos.mp64 5.1.0.60                         # Fileset Update
    bos.net.nfs.cachefs 5.1.0.54              # Fileset Update
    bos.rte.boot 5.1.0.53                     # Fileset Update
    bos.rte.boot 5.1.0.57                     # Fileset Update
    bos.rte.loc 5.1.0.51                      # Fileset Update
    bos.rte.tty 5.1.0.51                      # Fileset Update
    devices.pci.1410ff01.rte 5.1.0.53         # Fileset Update
    devices.tty.rte 5.1.0.51                  # Fileset Update

接着找包，安装包．

bos.adt.include 5.1.0.63                  # Fileset Update
    bos.adt.prof 5.1.0.66                     # Fileset Update
    bos.adt.prof 5.1.0.52                     # Fileset Update
    bos.adt.samples 5.1.0.56                  # Fileset Update
    bos.net.nfs.client 5.1.0.53               # Fileset Update
    bos.net.nfs.client 5.1.0.61               # Fileset Update
    bos.net.tcp.client 5.1.0.54               # Fileset Update
    bos.perf.tools 5.1.0.61                   # Fileset Update
    bos.rte.libc 5.1.0.66                     # Fileset Update
    bos.rte.libc 5.1.0.55                     # Fileset Update
    bos.rte.libpthreads 5.1.0.53              # Fileset Update
    bos.sysmgt.serv_aid 5.1.0.64              # Fileset Update
    bos.sysmgt.serv_aid 5.1.0.51              # Fileset Update
    bos.sysmgt.trace 5.1.0.55                 # Fileset Update
    devices.chrp.base.rte 5.1.0.54            # Fileset Update
    devices.chrp.base.rte 5.1.0.56            # Fileset Update
    devices.common.IBM.ethernet.rte 5.1.0.52  # Fileset Update
    devices.common.IBM.ethernet.rte 5.1.0.57  # Fileset Update

有好多包是相互依赖的．

# chdev -l hdisk11 -a pv=yes
Method error (/etc/methods/chgfcparray):
        0514-047 Cannot access a device.
同样的DS4300盘阵.EXP710扩展柜上划的LUN可以用.EXP810扩展柜上面划的LUN不能用

彻底崩溃.

If you are adding an EXP810 and attaching it to a EXP710 on the same
   redundant drive loop channel, after upgrading ESM firmware to a
   EXP810 that is attached to a EXP710 on the same redundant drive loop
   channel, you may get a the following message in Recovery Guru.

   "Drive Enclosures Not Cabled Correctly"

   This is the result of a failed message between the EXP710 and EXP810
   switched ESMs. The message informs another switched ESM that it is
   attached to another switched ESM.  The controllers also use this
   message to determine if storage expansion enclosures with switched
   ESMs are clustered correctly, and what causes the Recovery Guru message.

   The workaround is as follows:

   a. Verify through DS4000 Storage Manager Client that there is no lose
      of path redundancy to any of you storage expansion enclosures.

   b. Use the MEL to identify which storage expansion enclosures
      (i.e.EXP710, EXP810) is reporting the incorrect cabling, as well
      as which loop/channel (A side or B side).  When this occurs, you
      will find a MEL Event 2835 for each affected enclosure.  Enclosure
      and loop/channel identification are part of the event information.

   c. For each MEL event, for the Fibre Channel connection between the
      enclosure (i.e. 810, 710) identified in the MEL event and the next
      enclosure or controller (i.e. EXP810, EXP710, DS4800, DS4700, DS4200),
      unplug the cable from the SFP on one side and plug it back in.

   d. Repeat until all connections between the enclosures mentioned in the
      "Drive enclosures not cabled correctly" MEL have been unplugged and
      plugged back in.  Note that a connection between a enclosure and the
      adjacent enclosure/controller only needs to be unplugged/inserted once
      at one end.

March 30, 2007 - Storage Manager Installer package version 09.23.65.01

New DS4000 System Storage 4Gbps/15Krpm 300GB Fiber Channel Enhanced-Disk Drive Module (E-DDM) option
New DS4000 System Storage 750GB Serial ATA E-DDM option
The intermixing of the Fibre Channel and SATA E-DDMs within the same DS4700 storage subsystem or EXP810 drive expansion enclosure.
The intermix of EXP810/EXP710 and EXP100 enclosures behind a DS4700 and DS4800 storage subsystem. 没说有DS4300
New "Enhanced Disk Drive Predictive Fault Analysis" diagnostic feature on the DS4300, DS4500, DS4700 and DS4800 storage subsystem. The DS4000 controller will monitor and flag any the Fibre Channel and SATA hard drives in the DS4000 storage subsystem configuration with PFA error when one of the following conditions occurs
500 recoverable errors within a 24 hours period for Fibre Channel drives
4 medium errors within within a 24 hours period for Fibre Channel drives
8 medium errors within within a 24 hours period for SATA drives

New limitations with Storage Manager Installer (SMIA) package version
09.23.xx.01 release.
1. Not compatible with Controller firmware 06.12.56.00.

2. Reflected Fibre Channel (FC) OPN frames occurs when intermixing the
   EXP810, EXP710 and EXP100s behind DS4700 or DS4800 storage subsystems.
   This behavior causes excessive drive side timeout, drive side link down
   and drive side link up events be posted in the DS4000 storage subsystem
   Event log (MEL.) It might also cause drives to be by-passed or failed by
   the controller. NEW DRIVE SIDE FC CABLING REQUIREMENT MUST BE ADHERED TO
   WHEN HAVING EXP100 CONNECTED TO THE DS4700 OR DS4800 STORAGE SUBSYSTEMS.
   Please refer to the latest version of the Installation, User's and
   Maintenance Guide for these storage subsystems that are posted in the IBM
   DS4000 Support web site for more information.
   http://www.ibm.com/servers/storage/support/disk/

LABEL:          FCP_ARRAY_ERR6
IDENTIFIER:     B9735AF4

Date/Time:       Mon Sep 17 17:47:14 BEIS
Sequence Number: 1282
Machine Id:      000E936C4C00
Node Id:         XXXXX
Class:           H
Type:            PERM
Resource Name:   hdisk10         
Resource Class:  disk
Resource Type:   array
Location:        11-08-01

Description
SUBSYSTEM COMPONENT FAILURE

Probable Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

Failure Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0600 0308 0000 FF00 0000 0004 0000 0000 0000 0000 0000 0000 0000 0000 7000 0600
0000 0098 0000 0000 A100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 8000
0008 3000 0000 0000 0000 0000 0000 0000 0000 3154 3533 3838 3630 3139 2020 2020
2020 0623 0500 0008 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0005 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 5168 3039 3137 3037 2F30 3234 3833 3800 0000 0000 0000 0000 0000
0000 0000 1C05 D400 F305 1503 0000 0000 0000 0000 0000 0000 E400 EF00 0000 0000

B9735AF4   1017163307 P H hdisk11        SUBSYSTEM COMPONENT FAILURE
# errpt -a -j B9735AF4
---------------------------------------------------------------------------
LABEL:          FCP_ARRAY_ERR6
IDENTIFIER:     B9735AF4

Date/Time:       Wed Oct 17 16:33:25 BEIS
Sequence Number: 1363
Machine Id:      000E936C4C00
Node Id:         XXXX
Class:           H
Type:            PERM
Resource Name:   hdisk11         
Resource Class:  disk
Resource Type:   array
Location:        1n-08-01

Description
SUBSYSTEM COMPONENT FAILURE

Probable Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

Failure Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0102 0000 7000 0600
0000 0098 0000 0000 3F03 0000 0000 0000 0100 0000 0000 0000 0000 0000 0000 0000
0008 5900 0000 0000 0000 0000 0000 0000 0000 3154 3533 3838 3832 3231 2020 2020
2020 0623 0500 0009 0000 0600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0005 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 16EC 8362 3130 3137 3037 2F30 3133 3432 3800 0000 0000 0000 0000 0000
0000 0000 1C02 F000 F305 1503 0000 0000 0000 0000 0000 0000 E400 EF00 0000 0000
0000 0000
---------------------------------------------------------------------------
LABEL:          FCP_ARRAY_ERR6
IDENTIFIER:     B9735AF4

Date/Time:       Sat Sep 29 07:49:49 BEIS
Sequence Number: 1361
Machine Id:      000E936C4C00
Node Id:         XXX
Class:           H
Type:            PERM
Resource Name:   hdisk8         
Resource Class:  disk
Resource Type:   array
Location:        11-08-01

Description
SUBSYSTEM COMPONENT FAILURE

Probable Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

Failure Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 C8CF 0102 0000 7000 0600
0000 0098 0000 0000 3F03 0000 0000 0000 0100 0000 0000 0000 0000 0000 0000 0000
0008 5900 0000 0000 0000 0000 0000 0000 0000 3154 3533 3838 3832 3231 2020 2020
2020 0623 0500 0006 0000 0600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0005 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 1AE5 3039 3238 3037 2F31 3635 3232 3200 0000 0000 0000 0000 0000
0000 0000 1C02 2000 F305 1503 0000 0000 0000 0000 0000 0000 E400 EF10 0000 0001
0000 0000