2008-7-23 15:43
luchina
hacmp启动ok,小机死掉了
ERROR: Volume group: db2libvg on node: oa08 does not exist.
Starting Corrective Action: cl_resource_auto_import_vg.
___________________________________________________________________________________
Would you like to import shared VG: db2libvg, in resource group: db2_rg
onto node: oa08 [Yes / No]:
Auto Discover/Import of Volume Groups was set to true.
Gathering cluster information, which may take a few minutes.
Importing volume group db2libvg to the following node(s): oa08
WARNING: Major number 46 is not available on all the nodes in
the resource group. Major number 56 will be used.
oa07: 0516-1138 importvg: The -L option cannot be executed on the non-active
oa07: volume group db2libvg because the Volume Group Descriptor Area indicates it
oa07: contains the logical volume name loglv01, which already exists for another
oa07: volume group. The -L option does not allow logical volumes to be
oa07: automatically renamed by importvg. Rename loglv01 on local system and
oa07: retry the importvg -L.
oa07: cl_rsh had exit code = 1, see cspoc.log and/or clcomd.log for more information
cl_importvg: Error executing climportvg -y db2libvg -V 56 -Q 0004b05713a11c01 on node oa07
oa08: 0516-1804 chvg: The quorum change takes effect immediately.
oa08: Volume group db2libvg has been imported.
See cspoc.log for more detailed information.
Could not perform all imports.
No ODM values were changed.
<01> Importing Volume group: db2libvg onto node: oa08: FAIL
**********************************************************
[color=Red]新问题
现在这个问题解决了
在同步完以后 出现ok
然后有下面的提示
Remember to redo automatic error notification if configuration has changed.
Adding any necessary HACMP entries to /etc/inittab and /etc/rc.net for IPAT on n
ode oa08.
Adding any necessary HACMP entries to /etc/inittab and /etc/rc.net for IPAT on n
ode oa07.
我在etc/inittab 里看到 最后一行 写着
#HACMP for AIX These must be the last entries of run level a in inittab!
不知道啥意思 给他一个运行级别嘛?
之后我没修改任何文件
就启动hacmp
启动也正常 不到几秒的时间
这台小机居然死掉了[/color]
[[i] 本帖最后由 luchina 于 2008-7-23 16:34 编辑 [/i]]
2008-7-23 15:55
lj_cd
手动import卷组试试
2008-7-23 15:59
luchina
在同步的时候 共享存储上的 库所在卷组 是不是 一边要varyoffvg exportvg 在另外一台importvg就可以了吧 不用在varyonvg了吧
2008-7-23 16:04
luchina
好了 同步ok
[color=Red]但是 新问题 出来了
同步ok
在一台机器启动ha
启动已经ok
但是 不到1分钟 这台机器死掉了
[/color]
[[i] 本帖最后由 luchina 于 2008-7-23 16:17 编辑 [/i]]
2008-7-23 16:06
笨笨猪
ERROR: Volume group: db2libvg on node: oa08 does not exist.
写得非常清楚啊? 怎么也不看看提示。 :L
2008-7-23 16:21
luchina
[quote]原帖由 [i]笨笨猪[/i] 于 2008-7-23 16:06 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=811774&ptid=87455][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
ERROR: Volume group: db2libvg on node: oa08 does not exist.
写得非常清楚啊? 怎么也不看看提示。 :L [/quote]
现在这个问题解决了
在同步完以后 出现ok
然后有下面的提示
Remember to redo automatic error notification if configuration has changed.
Adding any necessary HACMP entries to /etc/inittab and /etc/rc.net for IPAT on n
ode oa08.
Adding any necessary HACMP entries to /etc/inittab and /etc/rc.net for IPAT on n
ode oa07.
之后我没修改任何文件
就启动hacmp
启动也正常 不到几秒的时间
这台小机居然死掉了
2008-7-23 16:35
lzolder
LVM还没搞清楚就开始搞HA?
errpt贴出来看看?hacmp.out贴出来看看?
HA版本?
HA补丁打了吗?
心跳正常吗?
2008-7-23 16:37
老农
无语,路过:L
2008-7-23 16:48
luchina
明天我把这些日志贴上来 现在远程操作操作没办法 下班了 看不了了
2008-7-23 17:02
hape1221
问题n多,不解决就考虑后面的问题。。。。:L
2008-7-23 17:08
daixianren
把共享VG中的LV改名吧
2008-7-23 17:17
老农
这属于没地基就盖高楼的
2008-7-23 17:32
小菜鸟_2008
学习中。。。。
2008-7-23 17:38
luchina
[quote]原帖由 [i]hape1221[/i] 于 2008-7-23 17:02 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=811799&ptid=87455][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
问题n多,不解决就考虑后面的问题。。。。:L [/quote]
您指的是 vg问题嘛?
还有就是vg中的lv改名?
不太明白
2008-7-23 17:44
eachto
[quote]原帖由 [i]luchina[/i] 于 2008-7-23 16:21 发表 [url=http://www.loveunix.net/redirect.php?goto=findpost&pid=811780&ptid=87455][img]http://www.loveunix.net/images/common/back.gif[/img][/url]
现在这个问题解决了
在同步完以后 出现ok
然后有下面的提示
Remember to redo automatic error notification if configuration has changed.
Adding any necessary HACMP entries to /etc/inittab ... [/quote]
Remember to redo automatic error notification if configuration has changed
2008-7-23 17:46
luchina
Remember to redo automatic error notification if configuration has changed
他的意思是 如果hacmp的任何节点的配置信息发生改变 记得打开自动错误通知 功能?
主要是的下面的那句 我不知道怎么修改 /etc/inittab /etc/rc.net
2008-7-23 18:40
巴蒂
路过,学习。
2008-7-23 18:52
kettyalx
:L 路过
2008-7-23 19:18
dooza
检查一下,两边的共享卷组的major number一样吗?
2008-7-23 21:26
giant#kenh
路过!
2008-7-23 21:54
ChaosLegion
这log.. - -
2008-7-23 22:43
axisman
看戏的····飘古~~
2008-7-23 23:05
benq011
看戏:$
2008-7-23 23:26
巴蒂
:lu5: :lu5: :lu5:
页:
[1]
Powered by Discuz! Archiver 5.5.0
© 2001-2006 Comsenz Inc.