2008-5-8 17:18
老Z
ds4500时钟同步问题
DS4500与管理站时间同步失败（SMClient 9.12, firmware 6.12)
storage subsystem->set controller clocks
Return code: Error 1000 - Could not communicate with the storage subsystem to complete this request.
Possible causes include network or connection problems, controller problems, or no power to the Host or storage subsystem. Check these possible causes and then retry the operation.
If you just changed the logical unit number (LUN) mapping for an access logical drive, you must reboot the affected Host(s) for the change to take effect.
ping l两个控制器都没有问题
DS4500与管理站时间同步失败（SMClient 9.12, firmware 6.12)
storage subsystem->set controller clocks
Return code: Error 1000 - Could not communicate with the storage subsystem to complete this request.
Possible causes include network or connection problems, controller problems, or no power to the Host or storage subsystem. Check these possible causes and then retry the operation.
If you just changed the logical unit number (LUN) mapping for an access logical drive, you must reboot the affected Host(s) for the change to take effect.
ping l两个控制器都没有问题
2008-5-9 03:21
老农
同步时间的时候，要两个控制器同时连
2008-5-9 08:27
老Z
两个控制器网络都连接正常，但两个控制器自己的时间也差一分钟。
2008-5-9 11:15
bennial
串口登录，执行setControllerTime_1试试
2008-5-9 15:27
老Z
谢4楼指教，不在现场，下次试试。
2008-5-12 10:16
pyockee
LZ解决后记得回复.
2008-5-12 14:07
cinord
在线的存储最好看清后再做.
2008-5-15 08:14
老Z
回复 #6 pyockee 的帖子
现没有机会做，等有结果一定贴上来。
现没有机会做，等有结果一定贴上来。
2008-6-4 10:22
老Z
问题有了结果，将目标存储系统从SMclient删除再重新添加就解决了。估计是SMclient的BUG。
2008-6-4 10:48
legend
ding:P
页: [1]
查看完整版本: ds4500时钟同步问题
Powered by Discuz! Archiver 5.5.0 © 2001-2006 Comsenz Inc.