图形界面不能启动和Oracle 启动脚本不能被调用的问题

具体情况如下:
      1、安装好一小机,重新启动后图形界面不能登陆,Telnet上去运行rc.dt后,图形界面能够启动,不知何故?注:重新安装CDE后仍然如故.
      2、在:/oracle/dbscript/dbstart.sh里写入如下内容：
su - oracle <<EOF
export ORACLE_SID=bgsoa
sleep 300
sqlplus /nolog <<EOO
conn / as sysdba
startup
exit
EOO
lsnrctl start
EOF

直接执行:/oracle/dbscript/dbstart.sh能够启动Oracle,但是将其加到/etc/inittab下后，不能正常的启动，/etc/inittab内容如下：
init:2:initdefault:
brc::sysinit:/sbin/rc.boot 3 >/dev/console 2>&1 # Phase 3 of system boot
powerfail::powerfail:/etc/rc.powerfail 2>&1 | alog -tboot > /dev/console # Power Failure Detection
mkatmpvc:2:once:/usr/sbin/mkatmpvc >/dev/console 2>&1
atmsvcd:2:once:/usr/sbin/atmsvcd >/dev/console 2>&1
load64bit:2:wait:/etc/methods/cfg64 >/dev/console 2>&1 # Enable 64-bit execs
tunables:23456789:wait:/usr/sbin/tunrestore -R > /dev/console 2>&1 # Set tunables
rc:23456789:wait:/etc/rc 2>&1 | alog -tboot > /dev/console # Multi-User checks
fbcheck:23456789:wait:/usr/sbin/fbcheck 2>&1 | alog -tboot > /dev/console # run /etc/firstboot
srcmstr:23456789:respawn:/usr/sbin/srcmstr # System Resource Controller
rctcpip:23456789:wait:/etc/rc.tcpip > /dev/console 2>&1 # Start TCP/IP daemons
sniinst:2:wait:/var/adm/sni/sniprei > /dev/console 2>&1
rcnfs:23456789:wait:/etc/rc.nfs > /dev/console 2>&1 # Start NFS Daemons
cron:23456789:respawn:/usr/sbin/cron
piobe:2:wait:/usr/lib/lpd/pioinit_cp >/dev/null 2>&1  # pb cleanup
install_assist:2:wait:/usr/sbin/install_assist </dev/console >/dev/console 2>&1
qdaemon:23456789:wait:/usr/bin/startsrc -sqdaemon
writesrv:23456789:wait:/usr/bin/startsrc -swritesrv
uprintfd:23456789:respawn:/usr/sbin/uprintfd
shdaemon:2:off:/usr/sbin/shdaemon >/dev/console 2>&1 # High availability daemon
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6
l7:7:wait:/etc/rc.d/rc 7
l8:8:wait:/etc/rc.d/rc 8
l9:9:wait:/etc/rc.d/rc 9
naudio::boot:/usr/sbin/naudio > /dev/null
ntbl_reset:2:once:/usr/bin/ntbl_reset_datafiles
rcml:2:once:/usr/sni/aix53/rc.ml > /dev/console 2>&1
logsymp:2:once:/usr/lib/ras/logsymptom # for system dumps
perfstat:2:once:/usr/lib/perf/libperfstat_updt_dictionary >/dev/console 2>&1
diagd:2:once:/usr/lpp/diagnostics/bin/diagd >/dev/console 2>&1
xmdaily:2:once:/usr/bin/xmwlm -L 2>&1 >/dev/null # Start xmwlm daily recording
ctrmc:2:once:/usr/bin/startsrc -s ctrmc > /dev/console 2>&1
dt:2:respawn:/etc/rc.dt
cons:0123456789:respawn:/usr/sbin/getty /dev/console
ha_star:h2:once:/etc/rc.ha_star >/dev/console 2>&1
vty1:2:off:/usr/sbin/getty /dev/vty1
vty0:2:off:/usr/sbin/getty /dev/vty0

#Oracle Start Script
#dbstart:23456789:respawn:/oracle/dbscript/dbstart.sh
dbstart.sh:2:respawn:/oracle/dbscript/dbstart.sh

请各位老大们帮我分析分析？小弟先在此谢过

试验过dbstart:23456789:respawn:/oracle/dbscript/dbstart.sh，也不行，但是我加了一条lspv的命令加到/etc/inittab后能够被调用成功，就是不调用/oracle/dbscript/dbstart.sh，不知道怎么办，另/oracle/dbscript/dbstart.sh的权限也是改为755的，谢谢大家

怎么被移动了?

请在aix版搜索 自动启动

注意起oracle要两个脚本，其中一个只需要一句话 su －XX "－c 调用下一个脚本"
你的图形启动问题可以看看是不是dtconfig问题，具体命令，man dtconfig或者搜索一下

谢谢燕老大