ibm CATE考试的变化

今天到ibm的官网上看了一下，发现现在的ibm考试又发生了一些变化：

原来的222考试由新的223考试替代。但是看下面ibm所要求的内容，好像是考222和223都可以，

然后在通过222或者223的基础上再通过三门考试即可获得CATE

Test(s):


Test 062 - IBM System p5 Virtualization Technical Support
Test 180 - p5 and pSeries Enterprise Technical Support AIX 5L V5.3

Any 1 of the following tests:
222 - p5 and pSeries Administration and Support AIX 5L V5.3
Test 223 - System p Administrator


Test 237 - pSeries HACMP for AIX 5L


我现在的疑问是，现在还可以报考222吗？是否考试中心只能报考223了，还有就是223是否有新的教材或者redbook。我在ibm网站上没有找到啊。

现在要通过：
222 - p5 and pSeries Administration and Support AIX 5L V5.3
Test 062 - IBM System p5 Virtualization Technical Support
Test 180 - p5 and pSeries Enterprise Technical Support AIX 5L V5.3
Test 237 - pSeries HACMP for AIX 5L
才能拿到cate


你所说新的223，不知道你说的什么，那有什么新223

不知道223和222区别大不，不会加上AIX6.1的东东吧

刚才看了一下：
Section 1 – Planning

Determine resource needs, features and limitations of required and installed hardware and OS levels, and redundancy requirements.
Describe Virtualization
LPAR and DLPAR and Advanced Power Virtualization features, benefits, functions, and VIO capabilities)
Micropartioning and Virtual I/O
Differentiate between the methods used to assign resources to virtual and standard LPARs
Requirements for installing a virtual server and virtual client LPARs
LPAR resource requirements for processor, memory and disk
Partition mobility
Energy requirements and strategy
Section 2 – AIX and other OS Installation and Update

Install AIX from Media using CD ROM or DVD
Install software updates (including a new version, technology level, service pack, Interim Fixes or efix)
Evaluate the options available for adding and removing filesets (e.g. commit, apply, remove, reject)
Identify the operating system technology level and service pack level and installed filesets
Verify integrity of OS (e.g. lppchk)
Use the lslpp command to identify
back level filesets
install history
to which fileset a program belongs
content of a fileset


Differences between migration, preservation, and new and complete overwrite installation
Section 3 - Boot Process

Describe the boot process (cfgmgr, file system mounts, application startup, rootvg varyon, BIST, POST, boot, sector load, login enablement)
Manage the boot process
Troubleshoot the boot process
Section 4 – Configuration

Describe the function of smit and wsm
Configure and check network configuration
Describe the function of NSORDER, /etc/netsvc.conf. and /etc/resolv.conf
Determine the daemons that are running in TCP/IP
+Describe the function of inetd and /etc/inetd.conf
Describe the function of /etc/hosts
Describe the methods of adding and removing routes
Check for possible exposure in system access files (e.g. /etc/hosts.equiv, .rhosts, .netrc, .forward /etc/inetd.conf /etc/rc.tcpip)
Describe the methods of Network security (IP filtering, TCP wrapper


Configure Ethernet adapter (e.g. speed, duplex, virtual Ethernet, and Etherchannel)
Use NFS to import/export file systems (e.g. /etc/exports, biod, nfsd, lssrc –g nfs.)
Configure, list and modify paging space
Determine/modify existing device configuration
Section 5 - Storage and LVM

Describe the relationship between physical volumes, volume groups, and logical volumes
Describe the relationship between logical volumes and filesystems
Describe the relationship between physical and logical partitions
Describe the differences between JFS and JFS2, including snapshot VGs
Manage VGs (varyonvg, varoffvg, mkvg, importvg, exportvg, lsvg)
Manage logical volumes (mklv, rmlv, and lslv)
Manage filesystems (mount, fsck, chfs, mkfs, defragfs) including filesystem logs
Determine whether a filesystem is protected at a hardware or software level (striped, mirrored, or RAID)
Section 6 – Monitoring and Tuning

Monitor root mail, error log, system log, and console log for error messages
Monitor filesystem growth
Use and interpret output from system monitoring tools
Understand and use AIX tuning commands and parameters (vmo, ioo, lvmo, nfso, no, and /ect/tunables)
Monitor current security settings and access
Section 7 – Problem Determination and Resolution

Select and use appropriate problem determination tools (e.g., errpt, diag, netstat, ifconfig, ping, filemon, traceroute, truss, trace, dbx, set-x)
Describe how to determine and recover from a full filesystem
Manage a support call with IBM (e.g., open, severity levels, escalation, closing, information gathering)
Describe hot plug procedure for replacing devices
Select appropriate actions (e.g., usrck, grpck, file permissions, resetting failed login, attempts, user limits) to correct user id issues
Select appropriate actions (e.g., usrck, grpck, file permissions, resetting failed login, attempts, user limits) to correct user id issues
Section 8 – Backup and Recovery / Disaster Recovery

Describe and employ methods of backing up and restoring the operating system (e.g., mksysb, mkcd, mkdvd, alt_disk) including selectively altering and excluding data during backup and restore process , and extracting individual files
Describe the differences between full, differential, and incremental backups and their effect on backup and restore window
Identify the elements of disaster recovery plans based on business needs
Describe the system commands that document current system configuration
Describe methods of backing up and restoring data and data structures (savevg and restvg, backup and restore, tar, cpio, pax, mkcd, gzip, and alt_disk_copy)
Describe methods to list and verify contents of backup media
Describe how to set and check local and global variables
Section 9 - Daily Management

Manage user and group accounts (add / delete / alter userids and passwords)
Alter default user profiles and limits (i.e., command shell profiles and /etc/security)
Define or modify AIX file and directory permissions (e.g., user, group, other) using chmod, chown, chgrp
Monitor user access (who, w, last)
Describe methods to monitor and manage processes (e.g., ps, kill, nice, jobs, fuser, lsof, topas, svmon, contents of /proc, lssrc, stopsrc, startsrc, and refresh commands)
Use available network access functionality (telnet, rsh, rexec, /etc/inetd.conf, /etc/services)
Determine which directories and files are filling a filesystems (du, sort, find)
Manage the print queuing subsystem
Edit a file using vi
Describe how to redirect stdin, stdout, and stderr
Describe how to schedule tasks ( cron or at)





  Test registration


Authorized Prometric test centers (worldwide testing)




Announcement
IBM certification tests to be delivered only through Prometric, beginning July 2, 2007




比222少了一点内容，加了APV的一些东西。
哪位有没有223的redbook？在IBM上找了一下没找到。

[[i] 本帖最后由 xyk1314521 于 2007-12-10 13:01 编辑 [/i]]

能过192，222

223肯定能过

还能报名
前两天刚报了222

233好像多了些power 6的概念吧，不管啦，先学。。。

路过瞧瞧

刚打电话问了考试中心, 说是已经不能注册000-222的考试了:'(

呵
生命周期这么短啊
也就是一年多的时间
哪有没有223的sg呢

内容相同的应该还是很多的。无非是加了点新知识。

加快进度呀！:D :D

上个月还可以，我是11/19考的

郁闷 那222岂不是过时了:sad

[quote]原帖由 [i]leon103[/i] 于 2007-12-12 15:34 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=744812&ptid=79492][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
郁闷 那222岂不是过时了:sad [/quote]

老的才值钱:lol

已经停考了

考试过时了，知识本身并不会过时

ding, 刚过223，感觉刚起步咯